Easy. Efficient. Ergonomic.
Complete solution for each type of root canal. Endostar E3 means three solutions, three files, three steps to reach your goal.
Endostar E3 Small Apical Rotary System
Endostar E3 Rotary System is a set of modern rotary files used for effective and efficient root canal preparation. They are manufactured from the highest quality nickel-titanium alloy, which provides durability and flexibility. The files can easily fit even strongly curved canals, this way minimizing the risk of canal perforation. The modified shape of the NiTi S file with two 90-degree cutting edges ensures efficient cutting, transport of debris up the canal, and decreases preparation time. The inactive tip allows safe preparation, minimizing the risk of a via falsa, perforations, and zipping. Easy-to-read taper value (number of stripes on the handle) and ISO size (color stripes) enables effortless use of the instruments.
Endostar E3 Small Apical Rotary System
Is an add-on set to the basic Endostar E3 system, intended for use in the very narrow and curved canals. It requires initial prepa- ration with the E3 Basic system files.
- The handpiece should run at 150-300 rpms. The operating speed of the handpiece should be constant throughout the shaping process
- Do not apply excessive force. An up-and-down motion should be used when operating the files.
- Shaping time should be as short as possible.
- Always use a lubricating agent when shaping the canal.
- The files are very sharp and should be used very carefully, with little force and without excessive “thrusting”.
- Operate the instruments and handpieces according to their operating instructions (especially torque settings and speed).
- Use the type and amount of instruments that is truly needed in a given clinical situation.
- Control the number of times that the instrument was used.
- Before using the instruments, be sure to run them outside the oral cavity and check for deformations, scratches and cracks.
- Dispose as medical waste.
The Endostar E3 Small Apical Rotary System is intended for use in the very narrow and curved canals. It requires initial prepa- ration with the E3 Basic system files.
- Prepare the cavity, locate the orifices and specify the working length of the canal. Next, prepare the canal with hand instruments as specified in the Endostar E3 Basic Rotary System clinical instruction.
- Shape the canal orifice with the use of the Endostar E3 Basic Rotary System No. 1 (08/30) file until delicate resistance is detectable. Do not apply excessive force to the instrument especially in highly curved canals.
- Begin to work with file No. 2 from the Endostar E3 Basic Rotary System (06/25). Perform up and down movements. Work to maximum of 1/2 of working length. Inspect the working length with the size 15 hand file and apex locator. Next, with the use of file No. 3 which is part of the E3 Basic Rotary System (04/30), try to go a few millimeters deeper down the canal. If the file can not go deeper down the canal, do not force it. Finish the preparation with the Endostar E3 Basic Rotary System and continue with the Endostar E3 Small Apical Rotary System.
- With the use of file No. 1 from the Endostar E3 Small Apical Rotary System (06/20) shape the canal a few millimeters down. Do not force the instrument down the canal. Take file No. 2 (04/25) and continue to shape the canal. Stop working 2 mm before reaching full working length. Use file No. 3 (04/20) until full working length is reached. File No. 3 (04/20) allows shaping even of very narrow and extremely curved canals. Next, go back to file No. 2 (04/25) and use it until full working length is reached.
- After checking the apical width with the NiTi file, consider widening the canal with file No. 3, which is part of the Endostar E3 Basic Rotary System (04/30) set. Skip this step in extremely curved canals and finish shaping at size 04/25.
Endostar E3 Small Apical krok po kroku
CE mark
Nickel-titanium alloy
Sterilization
Autoclave in 134 degrees. Recommended sterilization time: 3 minutes at 2.1 bar overpressure.
File
Number of strips
Taper (%)
ISO
Lenght
Nr 1
2
06
20
23 / 25 / 28 mm
Nr 2
3
04
25
23 / 25 / 28 mm
Nr 3
3
04
20
23 / 25 / 28 mm
Endostar E3 Small Apical
Intro set, 20/06, 25/04, 20/04, 3 pcs, 23 mm
E3S23
Intro set , 20/06, 25/04, 20/04, 3 pcs, 25 mm
E3S
Intro set, 20/06, 25/04, 20/04, 3 pcs., 28 mm
E3S28
Endostar E3 Small Apical
Refill, 20/06, 6 pcs., 23 mm
E3200623
Refill, 20/06, 6 pcs., 25 mm
E3200625
Refill, 20/06, 6 pcs., 28 mm
E3200628
Refill, 25/04, 6 pcs., 23 mm
E3250423
Refill 25/04, 6 pcs., . 25 mm
E3250425
Refill, 25/04, 6 pcs., 28 mm
E3250428
Refill, 20/04, 6 pcs., 23 mm
E3200423
Refill, 20/04, 6 pcs., . 25 mm
E3200425
Refill, 20/04, 6 pc,s. 28 mm
E3200428
Files to download:
Brochure - Endostar E3 Rotary System
Download
Instruction for use - Endostar E3 Rotary System EN
Download
Instruction for use - Endostar E3 Rotary System PL, EN, RU, FR
Download
Instruction for use - Endostar E3 Rotary System PL
Download
Instruction for use - Endostar E3 Rotary System RU
Download
Instruction for use - Endostar E3 Rotary System UA
Download
Instruction for use - Endostar E3 Rotary System FR
Download
Instructions for cleaning, disinfecting and sterilizing instruments
Download
Recommended number of usage of instruments for root canal treatment
Download